Ecosy+ Panoramic – Defra Approved 5kw – Eco Design Ready – Slimline Woodburning Stove – With Stand

The Defra Approved 5kw Ecosy+ Panoramic Slimline is one of the most up to date stoves on the market.

Eco Design Approved

The Defra Approved 5kw Ecosy+ Panoramic Slimline is one of the most up to date stoves on the market.  It has been tested and approved to meet the new Eco Design requirements which was made mandatory for all stoves manufactured from 2022 onwards, making this stove for now and the future. These test results have been approved by HETAS and listed on their official website Find out more about the Eco Design scheme at stoveindustryalliance.com.

Slimline

This stove answers a lot of customers’ problems – they need a physically large wood only stove but can only install one with a 5kw output. This has been achieved with this model by clever design. The external body is very wide (560mm) but the depth of the stove is shallow (314mm). The Purefire also has a twin layer construction – the inner layer has been tapered in at the sides making the fire box slightly smaller and therefore reducing the potential heat output. The firebox is still 400mm wide meaning large logs are not a problem. 

This version is Defra-approved.Non-Defra-approved version also available (without stand).

About

The Stand – The stand is specially designed for this particular stove and includes bolts to fix the stove to the stand itself and leveling points to ensure the stand does not rock on the hearth. Constructed from 10mm and 4mm thick steel plate the stand is strong enough to hold the weight of the stove and any associated chimney system. 

The Stove – This advanced wood burning stove, suitable for a 12mm hearth, has been designed by Ecosy+ and tested at KIWA Gastec in Cheltenham to CE and British standards along with the ERP testings for Eco Design.

This stove proves there is no need to spend £850+ to get an advanced, good quality stove. This stove has a huge, fully heat-resistant, glass-fronted door that gives an amazing view of the fire. Those of you who have had fires before will know this a big plus of owning a stove. The stove is a fully welded construction that includes a 5mm thick body and 10mm thick top. We are so confident of its quality that we offer a 5 year guarantee.

The Panoramic wood burning stove has a very minimal aesthetic and we have tucked away the air controls under the bottom ash lip which allowed us to increase the glass size for a maximised view of the fire. The stove’s air supply is solely drawn in from the rear and regulated by the sliding control on the front. This advanced design makes the stove adaptable for a “direct air feed” which is perfect for new homes. Note – On a standard install you will not require a direct air feed kit or an air brick installed in the room for this stove. This will only apply for new builds. 

Clean Burn System

The Ecosy+ has an advanced secondary/tertiary clean burn system. On more advanced units like this one, it is common to have the air fed in from the rear and split off to be fed under the fire, over the fire (Secondary burn) and over the glass to help keep it clean and clear (Airwash system). The secondary burn feature is a real advantage as this re-burns the initial gasses and smoke produced from the fire. This means you are getting every drop of heat from your fuel and in turn will save you filling the stove up as often, saving you money and time on fuel.

5 Year Guarantee

This covers the stove’s body and not the internal perishable parts like grates and fire bricks. Guarantee is activated when the stove is invoiced. 6 digit number on the top of each invoice is the warranty number.For stove to be covered it must be installed by a HETAS engineer or signed off by building control.

Stove Construction

Body – 10mm thick steel top and 5mm thick steel plate sides.

Stand – 10mm thick steel top and 4mm thick steel sides and back – Comes with fixing bolts and adjusters.

Grate – No grate required – Wood burns on the vermiculite base

Fire brick – Vermiculite

Why Are We So Cheap?

This is a common question we get asked and understand why people will sometimes wonder how it can be done so cheap. We design a large amount of our products and they come direct from our factory to us. This completely cuts out any middle men. We can stock over 2500 stoves at any one time and ship direct to the end user with no showrooms.

DEFRA Approved

This version of the 5kw Panoramic has been rigorously tested and approved to burn wood in a smoke controlled zones. Defra approved stoves with 5″ flue outlets, like this one, can also be installed with a 5″ liner. The Defra approval has been achieved by factory fitting a mechanical stop to prevent secondary air closure beyond the 31mm open position. When ordering over the phone please specify that you require the DEFRA version. If not you may be sent the non DEFRA unit.

Stove Features

  • Eco Design Ready – Approved by HETAS
  • HETAS (Cleaner Choice) approved, with a 66% improvement on the clean air act limit.
  • View on HETAS website.
  • DEFRA APPROVED
  • Over 80% efficient 
  • Typical log length –  390mm to 400mm long
  • Woodburning only with flat fire brick base
  • Reduced distance to combustibles materials (350mm side – 500mm rear)
  • Slimline – 560mm wide but only 5kw 
  • KW Range – 3.6kw to 6.9kw (5kw nominal and shown on data plate.)
  • Suitable for 12mm hearth.
  • Tight locking door with chrome handle as standard – Classic Range Brass, Black and Brushed handles can be selected on checkout 
  • Top and rear flue outlet.
  • FREE Ecosy+ printed over glove.
  • Chrome handle
  • Full vermiculite brick lining and base. (No grate or ash pan required for woodburning only stoves.)
  • Finished in heat resistant matt black paint.
  • Flue diameter 125mm (5”) with choice of top or rear flue outlet
  • Gross weight – 85kg
  • 10mm thick steel top, 5mm thick body
  • Pre-heated air wash system to help keep the glass clean
  • Tertiary air system that re-burns the smoke for a clean and efficient burn.
  • Air Brick/Vent Required? No (Some exceptions apply)
  • Height : 834mm, 32.60 inches.
  • Width: 560mm, 22.04 inches.
  • Depth : 314mm 12.36 inches.
  • Distance from the back of stove to centre of top flue 130mm 5.1 inches.
  • Distance from floor to centre of rear flue outlet 725mm – 28.5 inches.
  • 125mm 5″ top and rear flue collar included.
  • Internal stove dimensions –  H: 300mm W: 410mm D: 180mm
  • Option: 1000mm length of matching flue
  • Option: Ceramic glass is not covered under the guarantee for any stove on the market. Ceramic glass is fully heat resistant but will break if struck with a log, or similarly hard object. This glass is expensive, but for a small fee we are offering to guarantee it for a full year. This covers any accidental chips or cracks and photographic evidence will be required. This covers one claim only, not multiple breakages
  • Option: “Classic Range ” Brass or Brushed Chrome Handles
  • Option: Extra tall log guard Is offered on checkout – Standard Height Is 60mm at the highest point.  The additional bar adds 50mm to the overall height. (Currently out of stock)
  • Option: Spare rope kit, glue and glass clips for servicing 
  • Option: Custom Rear Flue Box – Easier to fit and clean. Also reduces the distance that the stove is pushed away from the wall.
Scroll to Top