About the Stove
This model was manufactured prior to January the 1st 2021 and can still legally be sold and installed in the UK. Once all of our stock has been sold, they will be discontinued. However, we will continue offering spare parts for years to come. For current Eco Design compliant models, please here.
Updated Model: Please note this is the updated version and has a square fronted door which differs slightly to the main gallery image. All other aspect of the stove are the same. Please see the last image on the listing which shows the new square door design.
This advanced stove is a stylish work horse, designed to reliably heat your whole home and look good at the same time. We have sold this stove for a number of years all over Europe; from large Highland homes to French chateaus. Its huge 590mm wide and 390mm deep fire box is one of the largest on the market and takes a huge load of fuel that can be accurately controlled.
The integrated steel boiler hugs the fire for maximum heat transfer to the water and the advanced secondary burn system creates a clean and efficient burn by reburning the initial smoke produced by the fire. This is an important feature on such a large stove in constant use as fuel consumption will be drastically reduced.
Some of the features on this stove include a huge fully heat resistant glass fronted door that gives an amazing view of the fire and is kept clean with the advanced pre heated airwash system. Those of you who have had fires before will know this feature is very important. The stove is a “hybrid” design with fully welded steel body and cast iron door.
We are so confident of its quality that we offer a 2 year guarantee; something that is not offered on any other boiler stove around this price bracket. We have tried to make this stove modern looking but not too contemporary so that it suits all interiors. Both the door and grate are made from think mineral cast iron and are designed to stand the test of time. (Spare parts are available for this stove and generally kept in stock at our distribution centre.)
Boiler Spec
Note: Our expertise focusses around the use of the stove itself and associated chimney parts. Technical questions in relation to the plumbing side, may need to be put to a qualified plumber. Please see all technical information for the boiler itself below.
- The stove will supply around 23kw ( 78,522 BTU) to the boiler and 7kw (23,898 BTU) directly to the room.( Exact heat output will always depend on the volume and quality of the fuel burnt. )
- Heats around 18 single radiators
- The boiler has 4 x 1″female threaded outlets at the rear. 2 are for flow and 2 are for return. Depending on the system, you could diagonally cap off 1 flow and 1 return outlet, if they are not required.
- Pressure – 3 bar ( 1bar = 100kpa)
- Boiler Water Capacity – 22 litres
To calculate your heating requirements – An 8kw boiler equates to around 28,000 BTU (1kw = approx 3500 BTU.) – Your radiators will be measured in BTU. To calculate your requirements add up all of the BTU.s of each radiator in the house.
The stove includes an additional thermostat that automatically opens and closes an additonal vent on the stove. This probe is linked directly to the boiler and opens when the stove requires extra air and closes if the boiler gets too hot.
Suitable for open vented systems only
This stove has the required CE,BSEN data plates on the back. The stove is also over 75% efficient, this means HUGE savings on fuel bills.
Clean Burn System
The 30kw boiler has an advanced secondary clean burn system that is controled by a chrome pull lever on the base of the stove. This lever opens and closes a vent that pulls air over the fire, re burning the initial smoke emitted by the stove. This makes the stove a lot more efficient and eco friendly saving you a large amount in fuel costs.
Stove Construction
Body – 10mm thick steel top and 5mm thick steel plate sides.
Grate – Includes a virgin ore cast iron ash riddling grate
Fire brick – N/A
Why Are We So Cheap?
This is a common question we get asked and understand why people will sometimes wonder how it can be done so cheap. We design a large amount of our products and they come direct from our factory to us. This completely cuts out any middle men. We can stock over 2500 wood burning stoves at any one time and ship direct to the end user with no showrooms. We always suggest prospective buyers take a look at our glowing feedback that currently has over 7000 positive comments on our stoves and stove products.
Guarantee
2 year guarantee
(This covers the stoves body and not the internal perishable parts like grates and fire bricks.) Wood burning stove guarantee is activated when the stove is invoiced. 6 digit number on the top of each invoice is the warranty number.
For the stove to be covered it must be installed by a HETAS engineer. The water and chimney must be installed and signed off at the same time. You should never use a boiler stove without water running through it. If you do use a boiler without water running through it you run the risk of twisting the boiler and voiding the guarantee.
Overnight Burn
The 30kw has an excellent overnight burn system. Its air tight door gaskets and manually controlled air flow controls allow you to close the stove right down overnight and wake up to a warm house in the morning. All you will need to do is reopen the air controls, add a little coal or wood and watch the fire roar again.