This Ecosy+ brand is designed and built by Stove World and is available only from us and a few carefully-selected stockists and installers. The Ottawa is an industry respected stove that has an advanced secondary burn system that has helped it pass the tough Defra requirements. This wood burning / multi-fuel stove is wonderfully hand constructed and blends traditional styling with modern efficiency. The Ottawa is a hybrid stove with a thick steel body and virgin cast door. Designed to stand the test of time, its clean lines make it suitable for a wide range of decor, styles and tastes. The stove is a multi-fuel model that will deliver a reliable source of heat with an accurate degree of control whether you are burning dry seasoned wood or smokeless coal.
About the Ecosy+ Ottawa 5
DEFRA Approved
This particular unit has been put through rigorous CE and smoke control tests here in the UK at Kiwa Gastec. We are proud to say the stove has passed with flying colours and, due to the stoves new secondary air system, it is running at over 80% efficient – a figure higher than most stoves sold in the UK. This will save the user a lot of money over the years. To top it off the stove has also passed a tough DIN+ particle test further proving it is a clean burning unit built for the demands of modern wood burning.
This version of the Ottawa 5 has been approved to burn wood and smokeless coal in a smoke controlled zone. It has been fitted with a mechanical stop to prevent secondary air closure beyond the 31mm open position. A 5″ flue liner can be fitted onto this stove. Also available at a lower cost: the non-Defra version of the Ottawa 5kw.
5 Year Guarantee
(This covers the stove’s body and not the internal perishable parts like glass, grate and fire bricks.) Guarantee is activated when the stove is invoiced. 6 digit number on the top of each invoice is the warranty number.For stove to be covered it must be installed by a HETAS engineer.
Clean Burn System and additional air
As mentioned above, the Ottawa 5 has an advanced clean burn system. This system works by drawing in air from the stoves base and filtering it over the fire bed. The addition of extra air over the fire is a proven way of burning off the initial smoke produced by the fire before it is released up the chimney. This system is not only beneficial to the environment but it is beneficial to you too. This system increases the stoves efficiency and an increased efficiency means less fuel will be consumed by the fire, saving you time, effort and money. In addition to this, the stove has an up to date air wash system that filters air over the glass helping to keep this clean and clear.
Stove Construction
- Body – Thick steel top plate and sides.
- Grate – Includes a virgin ore cast iron ash riddling grate
- Fire brick – Stone
- Brand – Ecosy+ Stoves
- Heat Output : 5Kw
- Over 80% efficient
- DEFRA APPROVED
- Outlet : 5″ (125mm) top and rear –
- Multi-fuel Stove – Includes cast iron riddle grate and ash pan
- Suitable for 12mm hearth.
- Design and Tested in the UK – All tests carried out by KIWA Gastec in Cheltenham
- Well engineered chrome handle and fittings
- 1 x FREE Stove World UK printed oven glove
- Stone Fire brick lining and cast iron back brick
- Steel baffle plate
- Gross weight – 68kg
- 10mm thick steel top and 5mm thick steel body
- Pre-heated air wash system to help keep the glass clean
- Secondary air system that re-burns the smoke for a clean and efficient burn.
- Air Brick/Vent Required? No (Some exceptions apply)
- Height : 560mm, 22 inches.
- Width: 390mm, 15.3 inches.
- Depth : 330mm 13 inches.
- Distance from the back of stove to centre of top flue 125mm 5 inches.
- Distance from floor to centre of rear flue outlet 460mm – 18 inches.
- Glass Size – 235mm x 275mm
- Internal stove dimensions – H: 240mm W: 310mm D: 230mm
